Tungsten carbide burr cylindrical ZYAS end cut dia. 02x10mm shank dia. 3mm Z3P universal medium cross cut

Technical information

Cut: 3 PLUS
Dia. external: 2 mm
Dia. shank: 3 mm
Length, cut: 10 mm
Length, total: 1,575
Length, total: 40 mm
RPM from, grey cast iron, white cast iron: 72000 RPM
RPM from, hardened, heat-treated steels over 1,200 N/mm²: 40000 RPM
RPM from, high-temperature-resistant materials: 40000 RPM
RPM from, rust and acid-resistant steels: 40000 RPM
RPM from, steels up to 1,200 N/mm²: 72000 RPM
RPM to, grey cast iron, white cast iron: 96000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²: 56000 RPM
RPM to, high-temperature-resistant materials: 72000 RPM
RPM to, rust and acid-resistant steels: 56000 RPM
RPM to, steels up to 1,200 N/mm²: 95000 RPM
Packaging unit: 1 piece

Description

Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.

Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Cylindrical burr according to DIN 8032 with circumferential and end cut conforming to DIN 8033.

Advantages

Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
Long tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
High surface quality.

Recommendations for use

To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Tungsten carbide burrs for general use, cut 3 PLUS, cylindrical shape ZYAS with end cut

Tungsten carbide burr cylindrical ZYAS end cut dia. 02x10mm shank dia. 3mm Z3P universal medium cross cut

Matching tool drive

PFERD Newsletter subscription