Cup brushes crimped miniature brushes, shank-mounted

Miniature cup brush TBU dia. 15 mm shank dia. 3 mm stainless steel wire dia. 0.10

Item number:
43209252
EAN:
4007220033302

Login / Register
Choose options
Dia. external
Dia. filament material
Dia. shank
Filament material
Technical information
Miniature cup brush TBU dia. 15 mm shank dia. 3 mm stainless steel wire dia. 0.10

Dia. cup
8 mm
Dia. external
15 mm
Dia. filament material
0.1 mm
Dia. shank
3 mm
Filament material
Stainless steel wire (INOX)
Length, filament
5 mm
Length, total
1-3/4
Length, total
45 mm
Max. RPM
20000 RPM
Mounting system
Shank
RPM, optimum, from
4000 RPM
RPM, optimum, to
10000 RPM
Width
3 mm
Packaging unit
10 pieces
Description

Suitable for light brushing such as deburring, cleaning and polishing. Particularly suitable for brushing on small surfaces due to face-down use with the entire brush face applied to the workpiece.

PFERD offers a wide range of miniature brushes for precision work. These can be used on flexible shaft drives, micro motors or electric grinders.

In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life. All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic in the case of cold working; i.e. it can be attracted using magnets. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) withstands temperatures up to 450 °C.

Advantages
  • Highly flexible, enabling optimal adjustment to the workpiece contour.
  • Maximum precision and efficiency in work on delicate workpieces.
  • Very good corrosion resistance.
  • Creates fine surfaces.
Recommendations for use
  • Please observe the recommended rotational speeds.
Safety notes
  • When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.
Materials that can be worked
Aluminium
Bronze
Cobalt-based alloys
Hard non-ferrous metal
High-temperature-resistant materials
Nickel-based alloys (e.g. Inconell and Hastelloy)
Nickel or titanium-based superalloys
Other non-ferrous metals
Soft titanium alloys (tensile strength 500 N/mm²)
Stainless steel (INOX)
Titanium
Titanium alloys
Applications
Cleaning
Deburring
Derusting
Paint stripping
Removing heat discolouration
Removing oxide layers
Roughening
Drive types
Flexible shaft drive
Straight grinder
Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.