Abrasive spiral bands cylindrical

SIC abrasive spiral band GSB cylindrical dia. 30x30mm SIC80 for hard non-ferrous metals

Item number:
42230080
EAN:
4007220066461

Login / Register
Choose options
Abrasive
Dia internal
Grit size
Height
Packaging unit
Technical information
SIC abrasive spiral band GSB cylindrical dia. 30x30mm SIC80 for hard non-ferrous metals

Abrasive
Silicon carbide SiC/C
Dia internal
30 mm
Dia. external
30 mm
Grit size
80
Height
30 mm
RPM, optimum, from
13000 RPM
RPM, optimum, to
19100 RPM
Packaging unit
100 pieces
Description

For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics. Particularly recommended for use on titanium alloys. Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.

In ISO 2421, abrasive spiral bands are designated as "cylindrical sleeves".

GSB = bulk pack of abrasive spiral bands

Advantages
  • The abrasive spiral band is firmly held in place on the rubber drum holder as the holder expands during use.
  • Excellent tool life due to special manufacturing process – even under the most demanding operating conditions.
  • Maximum economic efficiency thanks to particularly high stock removal rate and aggressive abrasive quality.
Recommendations for use
  • To easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the tool drive.
  • To ensure the abrasive spiral band is securely attached, adhere to the minimum speed for the rubber drum holder.
  • For the best results, use at a recommended cutting speed of 20-30 m/s.
  • Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
Ordering notes
  • Please order rubber drum holder separately.
Safety notes
  • The maximum permitted peripheral speed is 30 m/s.
  • For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
  • Do not allow abrasive spiral bands to protrude beyond the rubber drum holder.
Materials that can be worked
Aluminium
Bronze
Fibre-reinforced thermosetting plastics (GRP, CRP)
Stainless steel (INOX)
Stone
Thermoplastics
Titanium
Titanium alloys
Applications
Deburring
Leveling
Roughening
Sharpening
Step-by-step fine grinding
Surface work
Working on edges
Work on weld seams
Drive types
Flexible shaft drive
Straight grinder
Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.