Conical diamond files, width 10 mm

conical diamond file 10x170mm D126 (medium) for particularly narrow, deep-set contours

Item number:: 15917102
EAN:: 4007220070758

conical diamond file 10x170mm D126 (medium) for particularly narrow, deep-set contours 2

conical diamond file 10x170mm D126 (medium) for particularly narrow, deep-set contours 3

conical diamond file 10x170mm D126 (medium) for particularly narrow, deep-set contours 4

Technical data Change variant

Technical information

conical diamond file 10x170mm D126 (medium) for particularly narrow, deep-set contours

Grit size: D 126
Height, point: 0.5 mm
Height, tang: 2.5 mm
Length, coating: 50 mm
Length, total: 6-11/16
Length, total: 170 mm
Width: 10 mm
Packaging unit: 1 piece

Description

Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.

Diamond files and sheets are also used for processing hardened steel. The working temperatures are so low that no chemical wear occurs. This allows the higher hardness of the diamond grain to be exploited for a longer tool life.

The conical diamond files are used in tool-making for particularly narrow, deep-set contours. The forged shank allows for use without an additional handle.

Recommendations for use

Apply only slight pressure to the file, especially in workpiece edge areas.
Loaded diamond files can be cleaned in kerosene or anti-static plastic cleaner with a file brush. Alternatively, ultrasonic cleaning is also possible. Often it will suffice to knock the file against a hard object.
Avoid using grease!

Ordering notes

Customer-specific tool solutions are available on request.

Materials that can be worked: Abrasive materials; Case-hardened steels; Ferrite (magnetic material); Glass; Graphite and synthetic carbon; Nickel or titanium-based superalloys; Steel materials with a hardness > 54 HRC; Technical ceramics; Tool steels; Tungsten carbide

Applications: Deburring; Finishing; Leveling; Removing oxide layers; Surface work; Working on edges; Working on edges (chamfering, rounding)

Drive types: Manual application

Downloads

Conical diamond files, width 10 mm

conical diamond file 10x170mm D126 (medium) for particularly narrow, deep-set contours

PFERD Newsletter subscription