End brushes crimped, encapsulated shank-mounted

encapsulated end brush crimped PBV dia. 22 mm shank dia. 6 mm steel wire dia. 0.25

PBV 2222/6 ST 0,25

Item number:: 43208001
EAN:: 4007220153321

encapsulated end brush crimped PBV dia. 22 mm shank dia. 6 mm steel wire dia. 0.25 1

encapsulated end brush crimped PBV dia. 22 mm shank dia. 6 mm steel wire dia. 0.25 2

Technical data Change variant

Choose options

Dia. external

22 mm 30 mm

Dia. filament material

0.25 mm 0.35 mm

Filament material

Steel wire (ST)

Reset Filter

Technical information

encapsulated end brush crimped PBV dia. 22 mm shank dia. 6 mm steel wire dia. 0.25

Dia. cup: 22 mm
Dia. external: 22 mm
Dia. filament material: 0.25 mm
Dia. shank: 6 mm
Filament material: Steel wire (ST)
Length, filament: 25 mm
Length, total: 70 mm
Mounting system: Shank
RPM, max.: 13000 RPM
Packaging unit: 10 pieces

Description

Particularly aggressive brushing effect for heavy-duty brushing.

With plastic-bonded brushes, the filament material is bonded in an elastic plastic mass. In comparison to non-plastic-bonded brushes, the brushing effect is considerably more aggressive with limited flexibility.

Brushes with encapsulated steel wire are available in different versions. The hardness determines the applicable brushing effect.

Advantages

Focused working thanks to high dimensional stability.
Maximum tool life as premature wire breakage is prevented.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 300 watts.
Use face-down for a particularly intensive brushing effect.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing oxide layers; Root seam processing; Work on fillet welds; Work on weld seams

Drive types: Flexible shaft drive; Power drill; Straight grinder

Downloads

End brushes crimped, encapsulated shank-mounted

encapsulated end brush crimped PBV dia. 22 mm shank dia. 6 mm steel wire dia. 0.25

PBV 2222/6 ST 0,25

PFERD Newsletter subscription