HSS flat countersink, DIN 373 medium

HSS flat countersink with guide pin DIN 373 dia. 15.0 mm shank dia. 12 mm medium for through hole

Item number:: 25203111
EAN:: 4007220169155

HSS flat countersink with guide pin DIN 373 dia. 15.0 mm shank dia. 12 mm medium for through hole 2

HSS flat countersink with guide pin DIN 373 dia. 15.0 mm shank dia. 12 mm medium for through hole 3

HSS flat countersink with guide pin DIN 373 dia. 15.0 mm shank dia. 12 mm medium for through hole 4

HSS flat countersink with guide pin DIN 373 dia. 15.0 mm shank dia. 12 mm medium for through hole Youtube

Technical data Change variant

Technical information

HSS flat countersink with guide pin DIN 373 dia. 15.0 mm shank dia. 12 mm medium for through hole

Dia. ball bearing: 9 mm
Dia. shank: 12.5 mm
Diameter: 15 mm
Length, total: 100 mm
RPM, grey cast iron, white cast iron: 210 - 210 RPM
RPM, harte NE-Metalle: 320 - 320 RPM
RPM, rust and acid-resistant steels: 210 - 320 RPM
RPM, soft non-ferrous metals: 320 - 420 RPM
RPM, steels over 700 N/mm²: 210 - 320 RPM
RPM, steels up to 700 N/mm²: 210 - 420 RPM
RPM, thermoplastics, fibre-reinforced plastics (GRP/CRP): 210 - 320 RPM
Version: M
Packaging unit: 1 piece

Description

High-performance flat countersinks made from HSS according to DIN 373 for countersinking cylinder head and hexagon screws as well as nuts. Flat countersinks have a cylindrical design. The cylindrical pin in the relevant quality grades of fine, medium or tapping hole ensures coaxial alignment of the countersink to the bore.

High-performance countersink tools for through holes with the quality grade medium (M) according to ISO 273.

Advantages

Very high stock removal rate.
Optimum chip removal.
Burr-free results.
Long tool life.
Smooth operation.
Good surface quality.

Recommendations for use

Please observe the recommended rotational speeds.
Flat countersinks with the quality grade "medium" are suitable for producing flat countersinks at through holes or blind holes in the tolerance range "medium" with extended mounting accuracy.

Materials that can be worked: Aluminium; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Chipboard; Copper; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hard non-ferrous metal; Hardwood; Other; Other non-ferrous metals; Plastics; Roller-bearing and ball-bearing steels; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Soft wood; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Thermoplastics; Thermosetting plastics; Titanium; Titanium alloys; Tool steels; Tough aluminium alloys; White annealed cast iron (GTW, GJMW); Wood; Zinc

Applications: Countersinking

Drive types: Column drill; Power drill; Robot; Stationary machines; Tool machine

Downloads

brochure-drilling-and-countersink-tools-2022-web-en.pdf

HSS flat countersink, DIN 373 medium

HSS flat countersink with guide pin DIN 373 dia. 15.0 mm shank dia. 12 mm medium for through hole

PFERD Newsletter subscription