Legal notice Data protection Career

HSS hole saw set for craftsmen

Bimetal hole saw set Co8/M42 8-piece for craftspeople

Item number:
25900700
EAN:
4007220319314
Bimetal hole saw set Co8/M42 8-piece for craftspeople 1
Bimetal hole saw set Co8/M42 8-piece for craftspeople 2
Bimetal hole saw set Co8/M42 8-piece for craftspeople 3
Bimetal hole saw set Co8/M42 8-piece for craftspeople 1
Bimetal hole saw set Co8/M42 8-piece for craftspeople 2
Bimetal hole saw set Co8/M42 8-piece for craftspeople 3
Technical data
Login / Register

This set contains

Technical information
Bimetal hole saw set Co8/M42 8-piece for craftspeople
Height
50 mm
Length
200 mm
PFERD type
LS-SO 7 H
Width
170 mm
Packaging unit
1 piece
Description

The set contains five HSS hole saws in the most common diameters, including accessories, for use in crafts. It is supplied in a well-arranged plastic box which protects against dirt and damage. Operating instructions are included. It is possible to use hole saws LS 32 and LS 38 with the LSA adapter and washer.
Advantages
  • Cost-effective sawing of round cut-outs.
  • Chattering during sawing is prevented by the alternating tooth pitch.
  • High concentricity.
  • Good chip removal.
  • The hole saw is conveniently centred and guided via the replaceable HSS pilot drill.
  • Hole saw arbor is supplied with an ejection spring for improved ejection of the sawn material.
Recommendations for use
  • Observe the recommended rotational speeds.
  • Clamp the pilot drill in the hole saw arbor and make sure that it projects at least 3 mm (1/8") over the teeth of the hole saw.
  • When cutting metals, use a high-quality cutting oil, if possible. This facilitates smooth running and extends the hole saw service life. Exception: when working on aluminium, use kerosene instead of cutting oil.
  • HSS hole saws are suitable for work on stainless steel (INOX). In order to avoid corrosion, remove any particles which develop during work from the workpiece. Clean the workpiece chemically or mechanically (etching/polishing, etc.).
  • Make sure that all the teeth are applied evenly. To prevent tooth breakage, avoid swinging movements during sawing.
  • Avoid overheating the tool.
Safety notes
  • When using shank extensions, the recommended hole saw rotational speeds must not be exceeded. Risk of accidents!
Contents
  • The Allen key, 4 mm and the ejection spring are only available in a set and not individually.
Materials that can be worked
Aluminium
Hard non-ferrous metal
Plastics
Stainless steel (INOX)
Steel, cast steel
Applications
Cutting out holes
Drilling
Drive types
Column drill
Power drill
Downloads
See more
Scroll to top

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.