Bimetal hole saw Co8/M42 dia. 95 mm cutting depth 31 mm for steel, stainless steel, sheet metal, wood

Technical information

Bimetal hole saw Co8/M42 dia. 95 mm cutting depth 31 mm for steel, stainless steel, sheet metal, wood

Cutting depth, max: 31 mm
Dia. external: 95 mm
RPM from, rust and acid-resistant steels: 45 RPM
RPM from, soft non-ferrous metals: 120 RPM
RPM from, steels up to 1,200 N/mm²: 90 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP): 150 RPM
Packaging unit: 1 piece

Description

Hole saws are made from tough, shatter-proof, sturdy HSS bimetal. The saw teeth are made from high-quality M42 (Co8) material. They are used for cutting out holes.

The thread version 5/8-18 UNF includes the thread LS 32 to LS 210. The matching hole saw arbor is LSS 2.

Advantages

Cost-effective sawing of round cut-outs.
Chattering during sawing is prevented by the alternating tooth pitch.
High concentricity.
Good chip removal.
The hole saw is conveniently centred and guided via the replaceable HSS pilot drill.
Hole saw arbor is supplied with an ejection spring for improved ejection of the sawn material.

Recommendations for use

Observe the recommended rotational speeds.
Clamp the pilot drill in the hole saw arbor and make sure that it projects at least 3 mm (1/8") over the teeth of the hole saw.
When cutting metals, use a high-quality cutting oil, if possible. This facilitates smooth running and extends the hole saw service life. Exception: when working on aluminium, use kerosene instead of cutting oil.
HSS hole saws are suitable for work on stainless steel (INOX). In order to avoid corrosion, remove any particles which develop during work from the workpiece. Clean the workpiece chemically or mechanically (etching/polishing, etc.).
Make sure that all the teeth are applied evenly. To prevent tooth breakage, avoid swinging movements during sawing.
Avoid overheating the tool.
Observe the maximum cutting depth.

Ordering notes

Please order hole saw arbors separately.

Safety notes

When using shank extensions, the recommended hole saw rotational speeds must not be exceeded. Risk of accidents!

Materials that can be worked: Aluminium; Brass; Bronze; Chipboard; Copper; Hard non-ferrous metal; Hardwood; Other non-ferrous metals; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Soft wood; Stainless steel (INOX); Steel; Steel, cast steel; Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tough aluminium alloys; Wood; Zinc

Applications: Cutting out holes; Drilling

Drive types: Column drill; Power drill

Downloads

HSS hole saws thread version 5/8-18 UNF

Bimetal hole saw Co8/M42 dia. 95 mm cutting depth 31 mm for steel, stainless steel, sheet metal, wood

Matching accessories & spare parts

PFERD Newsletter subscription