HSS rotary cutters, cut 1, cylindrical shape with radius end C

HSS rotary cutter cylindrical shape with radius end C dia. 06x16 mm shank dia. 6 mm Z 1 universal coarse

HSS C 0616/6 Z1

Item number:: 22410716
EAN:: 4007220058824

HSS rotary cutter cylindrical shape with radius end C dia. 06x16 mm shank dia. 6 mm Z 1 universal coarse 1

Technical data Change variant

Choose options

Dia. external

6 mm 12 mm

Length, cut

16 mm 25 mm

Reset Filter

Matching accessories & spare parts

Handpieces for RCK system RCK GS 4/100

Technical information

HSS rotary cutter cylindrical shape with radius end C dia. 06x16 mm shank dia. 6 mm Z 1 universal coarse

Cut: 1
Dia. external: 6 mm
Dia. shank: 6 mm
Length, cut: 16 mm
Length, total: 60 mm
Packaging unit: 1 piece

Description

Cut 1 is especially well suited for machining of stainless steel (INOX), soft non-ferrous metals and plastics. It is used in a rotational speed range of 1,200 to 23,900 RPM, depending on the burr diameter.

Cylindrical burr with radius end.

Advantages

Highly aggressive.
Can be used at low rotational speeds.
Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS).
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Use HSS rotary cutters if your drive unit does not allow for high rotational speeds.
When used on soft materials, HSS rotary cutters can be an economical alternative to tungsten carbide burrs.
In contrast to tungsten carbide burrs, HSS rotary cutters need to be used with lower rotational speeds.

Materials that can be worked: Aluminium; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Cast iron; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardwood; Plastics; Soft aluminium alloys; Stainless steel (INOX); Thermoplastics; White annealed cast iron (GTW, GJMW); Wood; Zinc