HSS rotary cutter cylindrical shape end A-ST dia. 10x13mm shank dia. 6mm Z 3 universal medium fine chip breaker

Technical information

Cut: 3
Dia. external: 10 mm
Dia. shank: 6 mm
Length, cut: 13 mm
Length, total: 53 mm
RPM, grey cast iron, white cast iron: 2.600 - 3.200 RPM
RPM, steels up to 1,200 N/mm²: 2.600 - 3.200 RPM
Packaging unit: 1 piece

Description

Cut 3 has chip breakers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.

Cylindrical burr with end cut.

Advantages

Highly aggressive.
Can be used at low rotational speeds.
Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS).
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Use HSS rotary cutters if your drive unit does not allow for high rotational speeds.
When used on soft materials, HSS rotary cutters can be an economical alternative to tungsten carbide burrs.
In contrast to tungsten carbide burrs, HSS rotary cutters need to be used with lower rotational speeds.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Case-hardened steels; Cast iron; Cast steel; Grey/nodular cast iron (GG/GJL, GGG/GJS); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

HSS rotary cutters, cut 3, cylindrical shape A-ST with end cut

HSS rotary cutter cylindrical shape end A-ST dia. 10x13mm shank dia. 6mm Z 3 universal medium fine chip breaker

Included in

Matching tool drive

PFERD Newsletter subscription