HSS rotary cutters, cut 3, special shapes shank dia. 6 mm

HSS rotary cutter special shape dia. 12x18 mm shank dia. 6 mm Z 3 universal medium fine chip breaker

Item number:: 22104536
EAN:: 4007220056035

Technical data Change variant

Choose options

Dia. external

6 mm 12 mm

Length, cut

18 mm 20 mm 30 mm

PFERD type

HSS 45/6 HSS 55/6 HSS 63ST/6 HSS 64/6

Reset Filter

Technical information

HSS rotary cutter special shape dia. 12x18 mm shank dia. 6 mm Z 3 universal medium fine chip breaker

Cut: 3
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 18 mm
Length, total: 2,283
Length, total: 58 mm
PFERD type: HSS 45/6
RPM from, grey cast iron, white cast iron: 1600 RPM
RPM from, steels up to 1,200 N/mm²: 1600 RPM
RPM to, grey cast iron, white cast iron: 2200 RPM
RPM to, steels up to 1,200 N/mm²: 2200 RPM
Packaging unit: 1 piece

Description

Cut 3 has chip breakers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.

Rotary cutters in 4 special shapes with a shank diameter of 6 mm. Perfectly suited to diverse milling work due to their different shapes.

Advantages

Highly aggressive.
Can be used at low rotational speeds.
Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS).
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Use HSS rotary cutters if your drive unit does not allow for high rotational speeds.
When used on soft materials, HSS rotary cutters can be an economical alternative to tungsten carbide burrs.
In contrast to tungsten carbide burrs, HSS rotary cutters need to be used with lower rotational speeds.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Case-hardened steels; Cast iron; Cast steel; Grey/nodular cast iron (GG/GJL, GGG/GJS); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out

Drive types: Drive spindle; Flexible shaft drive; Straight grinder

Downloads

Included in

HSS rotary cutter set, cut 3 SET 82 Z3 10TLG

Matching tool drive

Robot spindles for stationary application PGAS 4/24 RS PGAS 4/24 RS

HSS rotary cutters, cut 3, special shapes shank dia. 6 mm

HSS rotary cutter special shape dia. 12x18 mm shank dia. 6 mm Z 3 universal medium fine chip breaker

Included in

Matching tool drive

PFERD Newsletter subscription