Tungsten carbide burrs for high performance, ALLROUND HC-FEP, oval shape TRE

Tungsten carbide high-performance burr ALLROUND oval TRE dia. 10x16mm shank dia. 6mm HICOAT universal

Item number:
21001059
EAN:
4007220222096

Login / Register
Choose options
Dia. external
Dia. shank
Length, cut
Length, total
Technical information
Tungsten carbide high-performance burr ALLROUND oval TRE dia. 10x16mm shank dia. 6mm HICOAT universal

Cut
ALLROUND HC-FEP
Dia. external
10 mm
Dia. shank
6 mm
Length, cut
16 mm
Length, total
2,204
Length, total
56 mm
RPM from, hard non-ferrous metals
14000 RPM
RPM from, hardened, heat-treated steels over 1,200 N/mm²
8000 RPM
RPM from, rust and acid-resistant steels
14000 RPM
RPM from, soft non-ferrous metals
14000 RPM
RPM from, steels up to 1,200 N/mm²
14000 RPM
RPM to, hard non-ferrous metals
24000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²
19000 RPM
RPM to, rust and acid-resistant steels
19000 RPM
RPM to, soft non-ferrous metals
29000 RPM
RPM to, steels up to 1,200 N/mm²
29000 RPM
Radius corner design
4 mm
Packaging unit
1 piece
Description

High-performance cut ALLROUND with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.

Oval burr according to DIN 8032 with cut conforming to DIN 8033.

Advantages
  • Significantly better stock removal rate than burrs with a conventional cross cut.
  • Saves time and money thanks to its very high stock removal rate on key materials.
  • Comfortable working with reduced vibration and less noise.
  • The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Recommendations for use
  • To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
  • Observe the recommended rotational speeds.
  • To ensure cost­effective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.
Safety notes
  • The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.
Materials that can be worked
Case-hardened steels
Cast steel
Hard aluminium alloys
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Steel
Steel, cast steel
Steels over 700 N/mm² (> 220 HB)
Steels up to 1,200 N/mm² (< 38 HRC)
Steels up to 700 N/mm² (< 220 HB)
Tool steels
Applications
Cutting out holes
Deburring
Leveling
Milling
Milling out
Surface work
Work on weld seams
Drive types
Drive spindle
Flexible shaft drive
Robot
Stationary machines
Straight grinder
Tool machine
PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the HICOAT coating for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.
product.aggregation.prv-eff
product.aggregation.prv-eff
product.aggregation.prv-eff
product.aggregation.prv-eff

product.aggregation.prv-ergo
product.aggregation.prv-ergo
product.aggregation.prv-ergo

Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.