Tungsten carbide burrs for high performance, ALU HC-NFE, conical shape with radius end KEL

Tungsten carbide high-performance burr ALU conical shape with radius end KEL dia. 12x30mm shank dia. 6mm for alu/non-ferrous metals HICOAT

KEL 1230/6 ALU HC-NFE

Item number:: 21125285
EAN:: 4007220533093

Tungsten carbide high-performance burr ALU conical shape with radius end KEL dia. 12x30mm shank dia. 6mm for alu/non-ferrous metals HICOAT 1

Tungsten carbide high-performance burr ALU conical shape with radius end KEL dia. 12x30mm shank dia. 6mm for alu/non-ferrous metals HICOAT 2

Technical data

Matching accessories & spare parts

Handpieces for RCK system RCK GS 4/400

Technical information

Tungsten carbide high-performance burr ALU conical shape with radius end KEL dia. 12x30mm shank dia. 6mm for alu/non-ferrous metals HICOAT

Angle: 14 °
Cut: ALU HC-NFE
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 30 mm
Length, total: 70 mm
RPM, harte NE-Metalle: 16.000 - 34.000 RPM
RPM, soft non-ferrous metals: 16.000 - 34.000 RPM
RPM, thermoplastics, fibre-reinforced plastics (GRP/CRP): 16.000 - 34.000 RPM
Radius corner design: 2.6 mm
Packaging unit: 1 piece

Description

The use of burrs with the PFERD TOOLS HICOAT coating HC-NFE prevents chips adhering during work on soft aluminium alloys. This increases the tool life and improves the surface quality of the workpiece.

Conical burr with round radius end according to DIN 8032.

Advantages

Mainly used for long-chipping and lubricating non-ferrous metals.
Maximum stock removal rate.
Effective chip removal through improved anti-adhesion characteristics.
Lower thermal loads.
Increased tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.
If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Aluminium; Brass; Bronze; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hard aluminium alloys; Hard non-ferrous metal; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Thermoplastics; Tough aluminium alloys; Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERD TOOLS EFFICIENCY recommends burrs with the HICOAT coating for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.