Tungsten carbide burrs for high performance, INOX HC-FEP, cylindrical shape ZYAS with end cut

Tungsten carbide high-performance burr INOX cylindrical ZYAS end cut dia. 12x25mm shank dia. 6mm HICOAT steel

Item number:: 21100581
EAN:: 4007220222249

Tungsten carbide high-performance burr INOX cylindrical ZYAS end cut dia. 12x25mm shank dia. 6mm HICOAT steel 2

Tungsten carbide high-performance burr INOX cylindrical ZYAS end cut dia. 12x25mm shank dia. 6mm HICOAT steel 3

Technical data

Technical information

Tungsten carbide high-performance burr INOX cylindrical ZYAS end cut dia. 12x25mm shank dia. 6mm HICOAT steel

Cut: INOX HC-FEP
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 25 mm
Length, total: 65 mm
RPM from, hard non-ferrous metals: 7000 RPM
RPM from, rust and acid-resistant steels: 12000 RPM
RPM from, soft non-ferrous metals: 7000 RPM
RPM to, hard non-ferrous metals: 16000 RPM
RPM to, rust and acid-resistant steels: 20000 RPM
RPM to, soft non-ferrous metals: 16000 RPM
RPM, harte NE-Metalle: 7.000 - 16.000 RPM
RPM, rust and acid-resistant steels: 12.000 - 20.000 RPM
RPM, soft non-ferrous metals: 7.000 - 16.000 RPM
Packaging unit: 1 piece

Description

High-performance cut INOX with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.

Cylindrical burr according to DIN 8032 with circumferential and end cut.

Advantages

The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Safety notes

The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Materials that can be worked: Hard non-ferrous metal; Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the HICOAT coating for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.