Tungsten carbide burrs for high performance, STEEL, cylindrical shape ZYAS with end cut

Tungsten carbide high-performance burr STEEL cylindrical ZYAS end dia. 12x25 mm shank dia. 6x150 mm steel

Item number:
21100527
EAN:
4007220091982

Login / Register
Choose options
Dia. external
Dia. shank
Length, cut
Length, total
Technical information
Tungsten carbide high-performance burr STEEL cylindrical ZYAS end dia. 12x25 mm shank dia. 6x150 mm steel

Cut
STEEL
Dia. external
12 mm
Dia. shank
6 mm
Length, cut
25 mm
Length, total
6,89
Length, total
175 mm
RPM to, hardened, heat-treated steels over 1,200 N/mm²
7000 RPM
RPM to, steels up to 1,200 N/mm²
7000 RPM
Packaging unit
1 piece
Description

With the innovative STEEL cut, PFERD has developed unique burrs for working with steel and cast steel. They feature tangibly increased aggressiveness and good guidance. They thus ensure safe and precise work. Thanks to their extremely high stock removal rate, burrs with the STEEL cut help users save considerable time when working, thus making them an economically efficient option.

Cylindrical burr according to DIN 8032. Shape ZYAS with circumferential and end cut.

Tungsten carbide burrs with a long shank are ideal for efficiently machining small, hard-to-reach areas of components. They can be shortened if required. This version has a long steel shank.

Advantages
  • Up to 50 % higher stock removal rate when used on steel and cast steel in comparison to conventional cross-cut burrs.
  • Tangibly more aggressive, large chips and very good chip removal through the innovative tooth geometry.
  • Workpieces are protected through significantly lower thermal load.
  • The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Recommendations for use
  • To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
  • Observe the recommended rotational speeds.
  • To ensure cost­effective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.
Safety notes
  • The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.
  • For safety reasons, the maximum rotational speeds with contact with the workpiece require a reduction in the recommended speed of tungsten carbide burrs with standard shanks. Observe the product information included.
  • When working with long shank lengths, it is crucial that the tool is in contact with the workpiece (or inserted in the bore or slot to be machined) before the drive system is turned on. As a rule, the tool must remain in contact with the workpiece for as long as the machine is running. Failure to observe this procedure may result in burr failure (bending) and hence an increased risk of accidents. If continuous contact between the tool and the workpiece is not guaranteed during use, the maximum idling speeds must not be exceeded.
  • Not suitable for robotic or stationary applications. Risk of bending. Use only rigid clamping systems/drives.
Materials that can be worked
Case-hardened steels
Cast steel
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Steel
Steel, cast steel
Steels over 700 N/mm² (> 220 HB)
Steels up to 1,200 N/mm² (< 38 HRC)
Steels up to 700 N/mm² (< 220 HB)
Tool steels
Applications
Cutting out holes
Deburring
Leveling
Milling
Milling out
Surface work
Work on weld seams
Drive types
Flexible shaft drive
Robot
Stationary machines
Straight grinder
Tool machine
PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the STEEL cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.
product.aggregation.prv-eff
product.aggregation.prv-eff
product.aggregation.prv-eff
product.aggregation.prv-eff

PFERDERGONOMICS

recommends burrs with the STEEL cut as an innovative tool solution for comfort when working, with significantly reduced vibration and less noise.
product.aggregation.prv-ergo
product.aggregation.prv-ergo
product.aggregation.prv-ergo

Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.