Tungsten carbide burrs for high performance, TOUGH-S, cylindrical shape ZYA without end cut

Tungsten carbide high-performance burr TOUGH-S cylindrical ZYA dia. 12x25 mm shank dia. 6 mm impact-resistant

Item number:: 21000017
EAN:: 4007220895672

Tungsten carbide high-performance burr TOUGH-S cylindrical ZYA dia. 12x25 mm shank dia. 6 mm impact-resistant 2

Tungsten carbide high-performance burr TOUGH-S cylindrical ZYA dia. 12x25 mm shank dia. 6 mm impact-resistant 3

Tungsten carbide high-performance burr TOUGH-S cylindrical ZYA dia. 12x25 mm shank dia. 6 mm impact-resistant Youtube

Technical data

Technical information

Tungsten carbide high-performance burr TOUGH-S cylindrical ZYA dia. 12x25 mm shank dia. 6 mm impact-resistant

Cut: TOUGH-S
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 25 mm
Length, total: 2,559
Length, total: 65 mm
RPM from, grey cast iron, white cast iron: 7000 RPM
RPM from, hardened, heat-treated steels over 1,200 N/mm²: 7000 RPM
RPM from, steels up to 1,200 N/mm²: 7000 RPM
RPM to, grey cast iron, white cast iron: 16000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²: 9000 RPM
RPM to, steels up to 1,200 N/mm²: 16000 RPM
Packaging unit: 1 piece

Description

The TOUGH-S cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH-S cut are characterized by smooth milling and high stock removal.

Cylindrical burr according to DIN 8032.

Advantages

The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Observe the recommended rotational speeds.
The TOUGH-S cut can be used on materials up to 54 HRC. For harder materials, it is recommended to perform trials beforehand.
Tungsten carbide burrs the TOUGH-S cut are also suitable for applications involving impact when using shank extensions, for applications with a high surface contact angle, for milling narrow contours, or for applications where high rotational speeds are not available.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Case-hardened steels; Cast iron; Cast steel; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Straight grinder

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 4/220 RS PGAS 4/220 RS

Tungsten carbide burrs for high performance, TOUGH-S, cylindrical shape ZYA without end cut

Tungsten carbide high-performance burr TOUGH-S cylindrical ZYA dia. 12x25 mm shank dia. 6 mm impact-resistant

Matching tool drive

PFERD Newsletter subscription