Solid carbide end mill dia. 5/8in, 4 cutting edges, for roughing, 2xDC, chamfer .008in 45°, AlCrN coating, HB shank, Universal

Technical information

Description

The solid carbide end mills are suitable for universal use on a variety of materials.

Mills with roughing for various applications, from roughing through to finishing and ramping.

Weldon shank HB in accordance with DIN 6535 with lateral driving surface.

Special features

Universal use on the most important materials.
High productivity due to optimum stock removal rate.
State-of-the-art coatings.
Design with neck chip channel.
Optimum chip control thanks to roughing cut.
Unequal pitch and unequal helix angle for low-vibration work with smooth running.

Recommendations for use

Materials that can be worked: Aluminium; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Copper; Ductile cast iron; Ferrite (magnetic material); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Roller-bearing and ball-bearing steels; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; Tough aluminium alloys

Downloads

Universal solid carbide end mill with four flutes UCR4, chamfer corner design with roughing cut – imperial