Wheel brushes crimped for burnishing machines, with hole

Wheel brush WBU dia. 100x100x19.1 mm hole stainless steel wire dia 0.20 burnishing machine

WBU 100100/19,1 INOX 0,20

Item number:: 43509003
EAN:: 4007220773079

Wheel brush WBU dia. 100x100x19.1 mm hole stainless steel wire dia 0.20 burnishing machine 1

Wheel brush WBU dia. 100x100x19.1 mm hole stainless steel wire dia 0.20 burnishing machine 2

Wheel brush WBU dia. 100x100x19.1 mm hole stainless steel wire dia 0.20 burnishing machine 3

Technical data Change variant

Choose options

Dia. external

100 mm

Dia. filament material

0.2 mm 0.27 mm 1.27 mm

Filament material

Silicon carbide (SiC) Stainless steel wire (INOX) Steel wire (LIT ST)

Reset Filter

Technical information

Wheel brush WBU dia. 100x100x19.1 mm hole stainless steel wire dia 0.20 burnishing machine

Dia. external: 100 mm
Dia. filament material: 0.2 mm
Dia. hole: 19.1 mm
Filament material: Stainless steel wire (INOX)
Length, filament: 26 mm
Mounting system: Centre hole
RPM, max.: 6000 RPM
Width: 100 mm
Packaging unit: 1 piece

Description

Excellent for surface structuring work on workpieces with large surfaces.

In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life. All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic in the case of cold working; i.e. it can be attracted using magnets. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) withstands temperatures up to 450 °C.

Advantages

Can be used with all commercially available burnishing machines thanks to the hole with four keyways.
Very good corrosion resistance.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.

Materials that can be worked: Aluminium; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing heat discolouration; Removing oxide layers; Roughening; Structuring (matt finishing, brush matting and satin finishing)

Drive types: Drive spindle; Drum grinders

Downloads

Wheel brushes crimped for burnishing machines, with hole

Wheel brush WBU dia. 100x100x19.1 mm hole stainless steel wire dia 0.20 burnishing machine

WBU 100100/19,1 INOX 0,20

PFERD Newsletter subscription