Wheel brushes, knotted, pipeline COMBITWIST

COMBITWIST PIPELINE brush knotted RBG dia. 178x6x22.2 mm steel wire dia. 0.50 mm angle grinders

Item number:: 43303810
EAN:: 4007220751190

COMBITWIST PIPELINE brush knotted RBG dia. 178x6x22.2 mm steel wire dia. 0.50 mm angle grinders 2

COMBITWIST PIPELINE brush knotted RBG dia. 178x6x22.2 mm steel wire dia. 0.50 mm angle grinders Youtube

Technical data Change variant

Choose options

Dia. external

125 mm 178 mm

Mounting system

Centre hole Thread

Reset Filter

Matching accessories & spare parts

Arbor for brushes with hole BO 12/22,2 150-180

Technical information

COMBITWIST PIPELINE brush knotted RBG dia. 178x6x22.2 mm steel wire dia. 0.50 mm angle grinders

Dia. external: 178 mm
Dia. filament material: 0.5 mm
Dia. hole: 22.2 mm
Filament material: Steel wire (ST)
Length, filament: 28 mm
Max. RPM: 9000 RPM
Mounting system: Centre hole
Number, knots: 72 pcs.
RPM, optimum, from: 4500 RPM
RPM, optimum, to: 8500 RPM
Width: 6 mm
Packaging unit: 10 pieces

Description

Very aggressive and robust brush that is able to withstand high mechanical loads. Perfect for heavy-duty brushing in pipeline and container construction.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire withstands temperatures up to 300 Â°C.

Advantages

Extra-slim design enables optimal access to hard-to-reach areas such as root weld seams.
Maximum economic efficiency due to maximum tool life and stock removal rate.
High level of comfort thanks to smooth running with no brush recoiling.
Suitable for work on corners and edges as the knots are less likely to unravel.
Aggressive brushing effect due to the very stiff wire knots.
Long tool life through use of PFERD special wire.

Recommendations for use

Please observe the recommended rotational speeds.
For optimum results, use on powerful angle grinders.

Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing oxide layers; Root seam processing; Work on fillet welds; Work on weld seams